Hoffmeyer's Mill has been manufacturing wood window sash and
storm windows since 1906. We are primarily set to machine 1 3/8"
or 1 3/4" thickness. The shapers, mortise and tenon machines
have been regularly maintained and as a result we have the capacity
to build you new "old" windows. Our experienced carpenters
have been making quality work in our mill for over 30 years and
were taught by the same who were taught by the same. We have new
generations learning the trade and plan to continue making quality
products for many years to come. These windows are primarily suited
for renovation/restoration market.
Irregular shapes and sizes are not a problems as we are a custom
shop that builds to suit each unique application. Please view
the entire page to see examples of our fine work created at our
Circa 1855 Heritage listed "Regency" cottage
in Guelph,Ontario. We have supplied many windows and storms in
the beautiful restoration of this home.
Windows completed by Hoffmeyer's for a home in Escarpment
What a room!
At Hoffmeyer's we are using the same machines that
have built windows for over a Century.
We can build you windows to match your existing
windows if you are doing a restoration or an addition.
We use bronze compression strips for smooth operation
and draft seal at the meeting rail and jamb.
We also build Storm Windows as well as Screens.
Bronze and fibreglass screening is available.
A 15" diameter circular sash with 4 true divided
lites. Interior and exterior casings are turned on the lathe.
Below you can see windows that have been reproduced to Gateway
National Recreational area in Staten Island , New York. The second
images shows you the lot as we prepare to ship. This partuclar
windows were constructed using tempered thermo units with LOW
E argon filled glass. Applied to the new units is a wide exterior
casing that was removed from the orignal unit whihc was sent up
to us to aid in duplicating the style as closely as possible.
A pair of 11 foot round top windows ready to be
shipped to Maine
4 and 6 "true divided lite" sash on not
your typical garden shed. Thanks Dan!
Hoffmeyer's uses Historic machinery to manufacture
Sash and Doors
Here is a typical storm window before assembly.
A closer look shows the mortise and tennon joinery
we use in our windows and doors.
our shaper that mills out the profile for sash.
Six over one style, to be installed in Goderich,
here they are, installed. Thanks Scott!
Above is a "six over six" style complete
unit with storm window installed.
Above shows you our matching capabilities, whatever
style or layout you may need!
Again, almost any style can be built.
A closer view of our muntin profile and expert joinery.
Again, most any size of sash can be produced here
Gothic style windows can still be produced.
Above is a large unit of windows ready to be shipped
to the USA.
More loose sash for casement type windows primed
Reproduction of old windows is our specialty.
.....a closer look!
This window is being used on a heritage designated
apartment building in Downtown Toronto.
another round top window we reproduced.
These arched top windows are made from 2 1/4"
thick African Mahogany.
on the right you can see the old falling apart example
we had as our guide.
There were many hours spent laying out these complex
Curved casings also had to be duplicated.
Order is shown almost ready to be shipped to Shelton,
Above shows you the windows installed. We made these
windows just like the originals, only better!
a house lot of 18 windows ready to be shipped.
ACCOYA wood is a superior material choice now available
(2010) from Hoffmeyer's Mill
Cottage Casements manufactured from Accoya wood
located on Higgins Lake, MI
A new sash for the Avonbank Church.
We make window sash and storm windows for most any
Reproduction gothic sash, storm and 12" deep
frame. Colored rolled catherdral glass is available.
Matching doors to go below the Gothic cathedral
We have recently reproduced four round sash for
dormers on one of the buildings of Harvard University.
Storefront in Beautiful Bayfield, Ontario
Many hours were spent recreating this lovely design.
LOW E argon thermal units were used to conserve
The customer was pleased with the outcome - plus
it came in under budget!
Window sash for the Scovil Forge in Higganum, CT.
Custom window sash with colored Cathedral glass.
1 877 OGILVIE (1 877 644 5843) toll free in the USA
or email firstname.lastname@example.org
images and content copyright 20114 updated 03/25/2017